Hello,

this board came with no start, there is no 3valw/5valw before pressing the power button, after pressing every thing rises except the discrete power supply and the consumption is 0.160A for 6 seconds then cut off

Both Main & EC firmware flashed

+VCC_CORE "PL14" = 1.67v
+VCC_CORE "PL14" = 9 ohm "SR23Y i5-5200U"

even with +VCC_CORE is up for 6 seconds, the CPU does not heat-up at all..

PM_SLP_S3#, PM_SLP_S4#, PM_SLP_S5# all rise for a millisecond and cut

no shorts found anywhere

is the processor dead ?

9 ohms doesn't look good.. I have measured an i7-5500U SR23W and it's around 45 ohms

The proc is dead, normal resistance of this proc must be near the 40 ohm, да вы и сами все знаете))

Yes he is a corpse..

I've injected 1.7volts to find if there's a shorted capacitor in the line, nothing was found and the processor started heating-up consuming 370mA

I don't have the tools to replace him, thank you.