Ремонт: Ноутбуков, Компьютеров
https://vlab.su/

Macbook Isp Programmer (Isp Programmer) Macbook efi password
https://vlab.su/viewtopic.php?f=51&t=54078
Страница 1 из 1

zenelli [ 03 дек 2016, 02:57 ]
Заголовок сообщения:  Macbook Isp Programmer (Isp Programmer) Macbook efi password

I wanted to know is there a good Programmer on the market who can program efi chips from macbooks without unsoldering the chip using the Isp connector?
i'm currently using raspberry pi but for 2015 model pro and air it doesnt work, i get different efi dumps.


Изображение

Shooter75 [ 05 дек 2016, 09:19 ]
Заголовок сообщения:  Re: Macbook Isp Programmer (Isp Programmer) Macbook efi password

Different pinout in new models can appear. Compare pinouts and modify rasPI programm.

zenelli [ 05 дек 2016, 21:35 ]
Заголовок сообщения:  Re: Macbook Isp Programmer (Isp Programmer) Macbook efi password

Shooter75 писал(а):
Different pinout in new models can appear. Compare pinouts and modify rasPI programm.


thank's for your reply, but i wanted to know if there
is a better programmer to work with this macbooks.
raspberry works fine till 2014 models but works very slow
and for 2015 models it doesnt read good (get different dumps)

i have also sofitech -16B and Mini programmer but onboard efi program is impossible, must unsolder chip

Shooter75 [ 07 дек 2016, 19:12 ]
Заголовок сообщения:  Re: Macbook Isp Programmer (Isp Programmer) Macbook efi password

If You know programming of CYPRESS MCUs, they has native hi speed SPI interface in some models.
For highest speed You need to use 4 bit mode of SPI @ 33MHz clock = 133Mbps data exchange speed.

Or reprogram your procedures in RasPI.

zenelli [ 12 дек 2016, 22:23 ]
Заголовок сообщения:  Re: Macbook Isp Programmer (Isp Programmer) Macbook efi password

Shooter75 писал(а):
If You know programming of CYPRESS MCUs, they has native hi speed SPI interface in some models.
For highest speed You need to use 4 bit mode of SPI @ 33MHz clock = 133Mbps data exchange speed.

Or reprogram your procedures in RasPI.


Sorry for my bad english,
but i ment instead of programming with raspberry i need another programmer who can program macbooks 2015 models without unsoldering the efi chip and using the clip.
I have the Sofi SP-8A and SP-16B and the mini programmer but they all do not work with this clip due power problems.

Shooter75 [ 12 дек 2016, 23:18 ]
Заголовок сообщения:  Re: Macbook Isp Programmer (Isp Programmer) Macbook efi password

All You need, to make adapter with bus drivers, which can drive more than 1 chip on bus.

Diode3 [ 19 дек 2016, 17:35 ]
Заголовок сообщения:  Re: Macbook Isp Programmer (Isp Programmer) Macbook efi password

zenelli писал(а):
I wanted to know is there a good Programmer on the market who can program efi chips from macbooks without unsoldering the chip using the Isp connector?
i'm currently using raspberry pi but for 2015 model pro and air it doesnt work, i get different efi dumps.


Саn you please tell more about how you programm 2013-2014 models EFI's with Raspberry? What soft do you use?
---------- Добавлено спустя 5 минут 2 секунды: ----------
And what port? GPIO?

zenelli [ 20 дек 2016, 00:32 ]
Заголовок сообщения:  Re: Macbook Isp Programmer (Isp Programmer) Macbook efi password

First at all my condolences for mine russian friends for this terror action!!

I use Flashrom with raspberry. Look at here for more info
https://ghostlyhaks.com/blog/apple-efi/ ... ?showall=1

Diode3 [ 20 дек 2016, 00:40 ]
Заголовок сообщения:  Re: Macbook Isp Programmer (Isp Programmer) Macbook efi password

Thank you!

Страница 1 из 1 Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/