Всем привет! Помогите правильно запустить тест, где и что нужно прописать? Тест пытаюсь запустить на ноуте, видик 2070, в слепую (по ряду причин), использую образ 400,281 который, флешка в uefi, secureboot выключен (через мод биоса), не всегда даже логи пишутся (иногда пустые файлы), зависит когда вытянуть флеху или выключить ноут. Вот содержимое файла mods в папке home:
111
MODS start: Fri Feb 26 00:00:22 2021
Command Line : gputest.js -short -test 275 -no_gold -adc_cal_check_ignore -matsinfo
CPU Foundry : GenuineIntel Name : Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz Family : 6 Model : 14 Stepping : 10
Version MODS : 400.281 OperatingSystem: Linux (x86_64) Kernel : 4.17.4-gentoo KernelDriver : 3.87 SBIOS Version : GL704GW.312 SBIOS Date : 02/26/2021 HostName : tinylinux
GPU 0 [01:00.0] dev.sub 0.0 ---------------------------------------- DevInst : 0 PCI Location : 0x00, 0x01, 0x00, 0x00 GPU DID : 0x1f10 PDI : 0x2ac9eb773717499a Raw ECID : 0x00a062800000005227051991 Raw ECID (GHS) : 0x164522705180000000a030140 ECID : PKYS56-10_x06_y05 Device Id : TU106 Revision : a1 NV Base : 0xa4000000 FB Base : 0x90000000 IRQ : 255
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP ------------------------- class code 0x30000, index 2 Error: Can't find Pci device with class code 0x30200, index 0 Error: Can't find Pci device with class code 0x60000, index 1 Error: Can't find Pci device with class code 0x60100, index 1 Error: Can't find Pci device with class code 0x60200, index 0 Error: Can't find Pci device with class code 0x60300, index 0 Error: Can't find Pci device with class code 0x60400, index 3 Error: Can't find Pci device with class code 0x60401, index 0 Error: Can't find Pci device with class code 0x60500, index 0 Error: Can't find Pci device with class code 0x60600, index 0 Error: Can't find Pci device with class code 0x60700, index 0 Error: Can't find Pci device with class code 0x60800, index 0 Error: Can't find Pci device with class code 0x60940, index 0 Error: Can't find Pci device with class code 0x60980, index 0 Error: Can't find Pci device with class code 0x60a00, index 0 Error: Can't find Pci device with class code 0x60b00, index 0 Error: Can't find Pci device with class code 0x60b01, index 0 Error: Can't find Pci device with class code 0x68000, index 0 Setup dma base only supported on PPC, skipping ACPI JT capabilities: 0x20012803 NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 GF100GpuSubdevice: FloorsweepingAffected=0 GF100GpuSubdevice: Floorsweeping parameters present on commandline: GF100GpuSubdevice: Floorsweeping parameter mask values: display=0x0 msdec=0x0 msvld=0x0 fbio_shift_override=0x0 ce=0x0 gpc=0x0 fb=0x0 fbio=0x0 fbio_shift=0x0 gpctpc[0]=0x0 gpctpc[1]=0x0 gpctpc[2]=0x0 gpctpc[3]=0x0 gpctpc[4]=0x0 gpctpc[5]=0x0 gpctpc[6]=0x0 gpctpc[7]=0x0 gpczcull[0]=0x0 gpczcull[1]=0x0 gpczcull[2]=0x0 gpczcull[3]=0x0 gpczcull[4]=0x0 gpczcull[5]=0x0 gpczcull[6]=0x0 gpczcull[7]=0x0 GF108PlusGpuSubdevice: Floorsweeping parameters present on commandline: GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0 GM10xGpuSubdevice: Floorsweeping parameters present on commandline: GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0 GM20xGpuSubdevice: Floorsweeping parameters present on commandline: GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0 GP10xGpuSubdevice: Floorsweeping parameters present on commandline: GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0 TU10x floorsweeping parameters present on commandline: TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0 Unknown init property : FbGddr5x8Mode fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14 NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57 NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains. NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0 NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57 NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 NVRM: ----------------------------------------------------------------------------------- NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name) NVRM: ----------------------------------------------------------------------------------- NVRM: | 0x05 | DisplayPort | 0x00000004 | -- | 00000100 ( DFP-0 ). NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000200 ( DFP-1 ). NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00000400 ( DFP-2 ). NVRM: ----------------------------------------------------------------------------------- NVRM: Since none of the original boot devices were valid, falling back to: 00000000 ( ). NVRM: | Suggested (boot/resume) device(s): 00000000 ( ). NVRM: | Selecting as primary device: 00000000 ( ). NVRM: ----------------------------------------------------------------------------------- NVRM: fanTachInit: Cooler table entry not found. NVRM: FANCTL: Disabling fan control (MAX). NVRM: fanDiagInit: VBIOS does not export all proper values FanDiag. Disabling! NVRM: _lpwrVbiosPsiPolicyOverrides: Invalid PSI volt ramp down time in VBIOS. Disabling DI coupled PSI. NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE. NVRM: inforomGetOCTObject: OCT object load failed, status=0x57 NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074 NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f. NVRM: Breakpoint on RC Disable Override is disabled NVRM: PCI-E device status errors pending (00000009): NVRM: Clearing these errors.. NVRM: PCI-E device AER errors pending (00200000): NVRM: Clearing these errors.. NVRM: _initThermDefaults: Unable to read VBIOS temperature limits. NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701000 returned garbage 0x407240db NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP --------------------------
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP ------------------------- Pci device with class code 0x60401, index 0 Error: Can't find Pci device with class code 0x60500, index 0 Error: Can't find Pci device with class code 0x60600, index 0 Error: Can't find Pci device with class code 0x60700, index 0 Error: Can't find Pci device with class code 0x60800, index 0 Error: Can't find Pci device with class code 0x60940, index 0 Error: Can't find Pci device with class code 0x60980, index 0 Error: Can't find Pci device with class code 0x60a00, index 0 Error: Can't find Pci device with class code 0x60b00, index 0 Error: Can't find Pci device with class code 0x60b01, index 0 Error: Can't find Pci device with class code 0x68000, index 0 Setup dma base only supported on PPC, skipping ACPI JT capabilities: 0x20012803 NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 GF100GpuSubdevice: FloorsweepingAffected=0 GF100GpuSubdevice: Floorsweeping parameters present on commandline: GF100GpuSubdevice: Floorsweeping parameter mask values: display=0x0 msdec=0x0 msvld=0x0 fbio_shift_override=0x0 ce=0x0 gpc=0x0 fb=0x0 fbio=0x0 fbio_shift=0x0 gpctpc[0]=0x0 gpctpc[1]=0x0 gpctpc[2]=0x0 gpctpc[3]=0x0 gpctpc[4]=0x0 gpctpc[5]=0x0 gpctpc[6]=0x0 gpctpc[7]=0x0 gpczcull[0]=0x0 gpczcull[1]=0x0 gpczcull[2]=0x0 gpczcull[3]=0x0 gpczcull[4]=0x0 gpczcull[5]=0x0 gpczcull[6]=0x0 gpczcull[7]=0x0 GF108PlusGpuSubdevice: Floorsweeping parameters present on commandline: GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0 GM10xGpuSubdevice: Floorsweeping parameters present on commandline: GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0 GM20xGpuSubdevice: Floorsweeping parameters present on commandline: GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0 GP10xGpuSubdevice: Floorsweeping parameters present on commandline: GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0 TU10x floorsweeping parameters present on commandline: TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0 Unknown init property : FbGddr5x8Mode fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14 NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57 NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains. NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0 NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57 NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 NVRM: ----------------------------------------------------------------------------------- NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name) NVRM: ----------------------------------------------------------------------------------- NVRM: | 0x05 | DisplayPort | 0x00000004 | -- | 00000100 ( DFP-0 ). NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000200 ( DFP-1 ). NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00000400 ( DFP-2 ). NVRM: ----------------------------------------------------------------------------------- NVRM: Since none of the original boot devices were valid, falling back to: 00000000 ( ). NVRM: | Suggested (boot/resume) device(s): 00000000 ( ). NVRM: | Selecting as primary device: 00000000 ( ). NVRM: ----------------------------------------------------------------------------------- NVRM: fanTachInit: Cooler table entry not found. NVRM: FANCTL: Disabling fan control (MAX). NVRM: fanDiagInit: VBIOS does not export all proper values FanDiag. Disabling! NVRM: _lpwrVbiosPsiPolicyOverrides: Invalid PSI volt ramp down time in VBIOS. Disabling DI coupled PSI. NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE. NVRM: inforomGetOCTObject: OCT object load failed, status=0x57 NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074 NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f. NVRM: Breakpoint on RC Disable Override is disabled NVRM: PCI-E device status errors pending (00000009): NVRM: Clearing these errors.. NVRM: PCI-E device AER errors pending (00200000): NVRM: Clearing these errors.. NVRM: _initThermDefaults: Unable to read VBIOS temperature limits. NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701000 returned garbage 0x407240db NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** First error recorded: 541 NVRM Detected memory error JavaScript stack trace: #0: Initialize() in <native>:0 #1: InitializeGpuTests() in gputest.jse:309 #2: gputest_main() in gputest.jse:2304 #3: main() in gputest.jse:2247 NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701004 returned garbage 0x40dc40da NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP --------------------------
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP ------------------------- ce with class code 0x60700, index 0 Error: Can't find Pci device with class code 0x60800, index 0 Error: Can't find Pci device with class code 0x60940, index 0 Error: Can't find Pci device with class code 0x60980, index 0 Error: Can't find Pci device with class code 0x60a00, index 0 Error: Can't find Pci device with class code 0x60b00, index 0 Error: Can't find Pci device with class code 0x60b01, index 0 Error: Can't find Pci device with class code 0x68000, index 0 Setup dma base only supported on PPC, skipping ACPI JT capabilities: 0x20012803 NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 GF100GpuSubdevice: FloorsweepingAffected=0 GF100GpuSubdevice: Floorsweeping parameters present on commandline: GF100GpuSubdevice: Floorsweeping parameter mask values: display=0x0 msdec=0x0 msvld=0x0 fbio_shift_override=0x0 ce=0x0 gpc=0x0 fb=0x0 fbio=0x0 fbio_shift=0x0 gpctpc[0]=0x0 gpctpc[1]=0x0 gpctpc[2]=0x0 gpctpc[3]=0x0 gpctpc[4]=0x0 gpctpc[5]=0x0 gpctpc[6]=0x0 gpctpc[7]=0x0 gpczcull[0]=0x0 gpczcull[1]=0x0 gpczcull[2]=0x0 gpczcull[3]=0x0 gpczcull[4]=0x0 gpczcull[5]=0x0 gpczcull[6]=0x0 gpczcull[7]=0x0 GF108PlusGpuSubdevice: Floorsweeping parameters present on commandline: GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0 GM10xGpuSubdevice: Floorsweeping parameters present on commandline: GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0 GM20xGpuSubdevice: Floorsweeping parameters present on commandline: GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0 GP10xGpuSubdevice: Floorsweeping parameters present on commandline: GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0 TU10x floorsweeping parameters present on commandline: TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0 Unknown init property : FbGddr5x8Mode fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14 NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57 NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains. NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0 NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57 NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 NVRM: ----------------------------------------------------------------------------------- NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name) NVRM: ----------------------------------------------------------------------------------- NVRM: | 0x05 | DisplayPort | 0x00000004 | -- | 00000100 ( DFP-0 ). NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000200 ( DFP-1 ). NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00000400 ( DFP-2 ). NVRM: ----------------------------------------------------------------------------------- NVRM: Since none of the original boot devices were valid, falling back to: 00000000 ( ). NVRM: | Suggested (boot/resume) device(s): 00000000 ( ). NVRM: | Selecting as primary device: 00000000 ( ). NVRM: ----------------------------------------------------------------------------------- NVRM: fanTachInit: Cooler table entry not found. NVRM: FANCTL: Disabling fan control (MAX). NVRM: fanDiagInit: VBIOS does not export all proper values FanDiag. Disabling! NVRM: _lpwrVbiosPsiPolicyOverrides: Invalid PSI volt ramp down time in VBIOS. Disabling DI coupled PSI. NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE. NVRM: inforomGetOCTObject: OCT object load failed, status=0x57 NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074 NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f. NVRM: Breakpoint on RC Disable Override is disabled NVRM: PCI-E device status errors pending (00000009): NVRM: Clearing these errors.. NVRM: PCI-E device AER errors pending (00200000): NVRM: Clearing these errors.. NVRM: _initThermDefaults: Unable to read VBIOS temperature limits. NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701000 returned garbage 0x407240db NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** First error recorded: 541 NVRM Detected memory error JavaScript stack trace: #0: Initialize() in <native>:0 #1: InitializeGpuTests() in gputest.jse:309 #2: gputest_main() in gputest.jse:2304 #3: main() in gputest.jse:2247 NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701004 returned garbage 0x40dc40da NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701008 returned garbage 0x4047408c NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP --------------------------
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP ------------------------- lass code 0x60980, index 0 Error: Can't find Pci device with class code 0x60a00, index 0 Error: Can't find Pci device with class code 0x60b00, index 0 Error: Can't find Pci device with class code 0x60b01, index 0 Error: Can't find Pci device with class code 0x68000, index 0 Setup dma base only supported on PPC, skipping ACPI JT capabilities: 0x20012803 NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 GF100GpuSubdevice: FloorsweepingAffected=0 GF100GpuSubdevice: Floorsweeping parameters present on commandline: GF100GpuSubdevice: Floorsweeping parameter mask values: display=0x0 msdec=0x0 msvld=0x0 fbio_shift_override=0x0 ce=0x0 gpc=0x0 fb=0x0 fbio=0x0 fbio_shift=0x0 gpctpc[0]=0x0 gpctpc[1]=0x0 gpctpc[2]=0x0 gpctpc[3]=0x0 gpctpc[4]=0x0 gpctpc[5]=0x0 gpctpc[6]=0x0 gpctpc[7]=0x0 gpczcull[0]=0x0 gpczcull[1]=0x0 gpczcull[2]=0x0 gpczcull[3]=0x0 gpczcull[4]=0x0 gpczcull[5]=0x0 gpczcull[6]=0x0 gpczcull[7]=0x0 GF108PlusGpuSubdevice: Floorsweeping parameters present on commandline: GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0 GM10xGpuSubdevice: Floorsweeping parameters present on commandline: GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0 GM20xGpuSubdevice: Floorsweeping parameters present on commandline: GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0 GP10xGpuSubdevice: Floorsweeping parameters present on commandline: GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0 TU10x floorsweeping parameters present on commandline: TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0 Unknown init property : FbGddr5x8Mode fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14 NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57 NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains. NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0 NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57 NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 NVRM: ----------------------------------------------------------------------------------- NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name) NVRM: ----------------------------------------------------------------------------------- NVRM: | 0x05 | DisplayPort | 0x00000004 | -- | 00000100 ( DFP-0 ). NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000200 ( DFP-1 ). NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00000400 ( DFP-2 ). NVRM: ----------------------------------------------------------------------------------- NVRM: Since none of the original boot devices were valid, falling back to: 00000000 ( ). NVRM: | Suggested (boot/resume) device(s): 00000000 ( ). NVRM: | Selecting as primary device: 00000000 ( ). NVRM: ----------------------------------------------------------------------------------- NVRM: fanTachInit: Cooler table entry not found. NVRM: FANCTL: Disabling fan control (MAX). NVRM: fanDiagInit: VBIOS does not export all proper values FanDiag. Disabling! NVRM: _lpwrVbiosPsiPolicyOverrides: Invalid PSI volt ramp down time in VBIOS. Disabling DI coupled PSI. NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE. NVRM: inforomGetOCTObject: OCT object load failed, status=0x57 NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074 NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f. NVRM: Breakpoint on RC Disable Override is disabled NVRM: PCI-E device status errors pending (00000009): NVRM: Clearing these errors.. NVRM: PCI-E device AER errors pending (00200000): NVRM: Clearing these errors.. NVRM: _initThermDefaults: Unable to read VBIOS temperature limits. NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701000 returned garbage 0x407240db NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** First error recorded: 541 NVRM Detected memory error JavaScript stack trace: #0: Initialize() in <native>:0 #1: InitializeGpuTests() in gputest.jse:309 #2: gputest_main() in gputest.jse:2304 #3: main() in gputest.jse:2247 NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701004 returned garbage 0x40dc40da NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701008 returned garbage 0x4047408c NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x70100c returned garbage 0x40a440f8 NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP -------------------------- Error 000000000229 : Gpu.Initialize hardware was not initialized Error 000000000229 : Global.PrintGpuInitError hardware was not initialized Error 000000000229 : Global.InitializeGpuTests hardware was not initialized
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP ------------------------- pc=0x0 fb=0x0 fbio=0x0 fbio_shift=0x0 gpctpc[0]=0x0 gpctpc[1]=0x0 gpctpc[2]=0x0 gpctpc[3]=0x0 gpctpc[4]=0x0 gpctpc[5]=0x0 gpctpc[6]=0x0 gpctpc[7]=0x0 gpczcull[0]=0x0 gpczcull[1]=0x0 gpczcull[2]=0x0 gpczcull[3]=0x0 gpczcull[4]=0x0 gpczcull[5]=0x0 gpczcull[6]=0x0 gpczcull[7]=0x0 GF108PlusGpuSubdevice: Floorsweeping parameters present on commandline: GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0 GM10xGpuSubdevice: Floorsweeping parameters present on commandline: GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0 GM20xGpuSubdevice: Floorsweeping parameters present on commandline: GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0 GP10xGpuSubdevice: Floorsweeping parameters present on commandline: GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0 TU10x floorsweeping parameters present on commandline: TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0 Unknown init property : FbGddr5x8Mode fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14 NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB NVRM: instSetBar0WindowToWorkspaceBase_GM200: VGA workspace base is invalid. NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57 NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains. NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255 NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0 NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57 NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header! ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0 NVRM: ----------------------------------------------------------------------------------- NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name) NVRM: ----------------------------------------------------------------------------------- NVRM: | 0x05 | DisplayPort | 0x00000004 | -- | 00000100 ( DFP-0 ). NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000200 ( DFP-1 ). NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00000400 ( DFP-2 ). NVRM: ----------------------------------------------------------------------------------- NVRM: Since none of the original boot devices were valid, falling back to: 00000000 ( ). NVRM: | Suggested (boot/resume) device(s): 00000000 ( ). NVRM: | Selecting as primary device: 00000000 ( ). NVRM: ----------------------------------------------------------------------------------- NVRM: fanTachInit: Cooler table entry not found. NVRM: FANCTL: Disabling fan control (MAX). NVRM: fanDiagInit: VBIOS does not export all proper values FanDiag. Disabling! NVRM: _lpwrVbiosPsiPolicyOverrides: Invalid PSI volt ramp down time in VBIOS. Disabling DI coupled PSI. NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE. NVRM: inforomGetOCTObject: OCT object load failed, status=0x57 NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074 NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f. NVRM: Breakpoint on RC Disable Override is disabled NVRM: PCI-E device status errors pending (00000009): NVRM: Clearing these errors.. NVRM: PCI-E device AER errors pending (00200000): NVRM: Clearing these errors.. NVRM: _initThermDefaults: Unable to read VBIOS temperature limits. NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701000 returned garbage 0x407240db NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** First error recorded: 541 NVRM Detected memory error JavaScript stack trace: #0: Initialize() in <native>:0 #1: InitializeGpuTests() in gputest.jse:309 #2: gputest_main() in gputest.jse:2304 #3: main() in gputest.jse:2247 NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701004 returned garbage 0x40dc40da NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x701008 returned garbage 0x4047408c NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** NVRM: busVerifyBar2_GK104 MMUTest BAR0 window offset 0x70100c returned garbage 0x40a440f8 NVRM: bp @ ../../../../resman/kernel/bus/fermi/busgf100.c:6552 (reason=114)
ERROR: ** ModsDrvBreakPoint ** NVRM: *** Cannot load state into the device Error 000000000229 : Gpu.Initialize hardware was not initialized Error 000000000229 : Global.PrintGpuInitError hardware was not initialized Error 000000000229 : Global.InitializeGpuTests hardware was not initialized Skipping DisableUserInterface. Beginning GPU shut down Shutdown : GPU devices not initialized, skipping GPU nvlink shutdown NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJHWPM.NVOC: __nvoc_objDelete: Child class OBJSCHED_HW not freed from parent class OBJSCHEDMGR.NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJPERF.NVRM: busFlushVirtualBar2_VBAR2 found unfreed bar2 mapping of offset 0x1fde42000! NVRM: bp @ ../../../../resman/kernel/bus/nv50/vbar2.c:361
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP -------------------------- MODS is exiting with failure after assert #5. Breakpoint limit exceeded. Error 000000000818 : Global.VerifyErrorCode Mods detected an assertion failure
Error Code = 000000000541 (NVRM Detected memory error)
####### #### ######## ### ####### ###### ######## ### ## ## ## ## ### ## ## ## ## ### ####### ######## ## ### ####### ######## ## ### ## ## ## ## ### ## ## ## ######## ######## ## ## ## ######## ########
Error 000000000818 : Global.PrintErrors Mods detected an assertion failure Error 000000000818 : Global.PrintVbiosStatus Mods detected an assertion failure Error 000000000818 : Global.PrintGpuTestErrors Mods detected an assertion failure Failed to open file cmd.txt ERROR: Can not create command file; stack is not available
|