Подскажите что за 6ти ногий зверь
http://eximage.ru/image.php?di=WXPX
написано на ней AE3TB

SY8065ABC

hi all. i have an asus with mb: x750dp rev:2.0 with burned IT8528e, i replaced this ic with new one and now when i plug power cord laptop make a power cicle, one led lights out but no image, no cooler activity, when i press power button it doesn't make anyting.
if i put battery on mb no led, no power cicle.
on bios is on pin 1 i have nothing, only on pin 3 i have 3.3 v


anybody know what could be the problem? i read somewhere that it8528e must be programed but i do not have dump and i don't how how to do that, i have an ch342a usb programer but i don't reprogramed this king of ic by now.

tell me, what power on pin 8 on bios ic?

on pin 3, 7, 8 i have 3.3v

When you plug battery, charge indicator light on?

not programmed

when i plug battery no light come on. only when is only on ac lights on first led but i can't power on.

update: i measured motherboard and i found that an chip TPS51225C is very hot when i put finger on him, i measured next values:
vbst1: 10.11v
drvh1: 5.65v
en1: 3.36v
vclk: 2.75v
sw1: 5.58
cs1:0.81
vfb1:2.07
vreg3: 3.37
vfb2:0
cs2:0.89
en2:0.08
pgood:0.0
sw2:0.00
vbst2:5.00
drvh2:0.0
drvl2:0.0
vin:19.37
vreg5:5.20
vo1:5.20
drvl1:0.26

and still i don't have 3.3 on pin 1 on bios chip , instead i have 3.3v on 3rth pin
could be the problem from TPS51225C?